How To Cut Hole In Service Panel

Vinyl fence is a durable, low-maintenance fence material. Information technology typically comes in 6 ft or 8 ft lengths. Perfect if you have a fence run that is perfectly divisible by vi or 8. Simply oft, y'all need to cut a fence panel.Tin can vinyl contend panels be cut to size? If so, with what? And how? In this blog, we'll discuss whether a vinyl contend console tin can be cut, what to cutting vinyl contend with, and how to cut vinyl contend panels.

Can vinyl fence panels be cut to size?

In general, yes - vinyl debate panels can exist cutting to size. Typically, cut the width to size won't cause problems. Cut down the elevation, however, could crusade installation issues. Before taking out the saw, you lot should enquire these questions:

Will cutting the panel void the warranty? Sometimes, cutting or modifying the fence panel in any way can void the manufacturer's warranty. If and then, y'all'll need to weigh the importance of cut the contend panel with the desire to keep the warranty.
How does the panel attach to the posts? If the vinyl fence panel attaches to the posts past slipping into routed post holes, you won't want to cut down the height. If you cut down the meridian, the rails will not lucifer up with the placement of the holes.
How exercise the pickets attach to the track? Yous don't want to cutting off whatsoever special grooves or channels in the pickets that create a secure picket-to-rail connection.

What to cut vinyl debate with

We recommend using a circular saw with a fine-tooth blade to cut vinyl fence.

How to cutting vinyl fence panels

Using a tape measure out, measure out the length betwixt the posts where you'll install your vinyl fence. If the fence panel attaches to the posts using routed postholes, add a couple of inches so the rail on the panel are long enough to fit in the holes.
Measure the length of the fence console y'all desire to cut and marker using a carpenter's pencil or chalk. Exist sure the mark is straight and square.
Using a circular saw with a fine-molar blade, cut the vinyl fence along the marker yous created in step two.
Remove whatever pickets that no longer fit in the panel.
Attach the console to the posts, following the argue panel instructions.
Notation: If y'all shorten a vinyl contend rail that has locking tabs, install track clips on the terminate of the cutting side before installing.